Closer look at CRC Foam’s EVA bed mat on Polaris Pro Series SXS/UTV, providing slip resistance and custom styling

Detailed shot of removable EVA foam bed mat by CRC Foam for 2- 4-seat Polaris Pro Series, ensuring superior off-road performance

Polaris Pro R/S/XP Kit

Name: Polaris Pro R/S/XP Kit
Brand: CRC Foam
SKU: 25_proRSXP
Price: 500.00 USD
Availability: InStock

$500.00

Quantity

Estimate delivery times: 14-21 days (United States).

No refunds for printed foam items post-shipping. Contact us at crcfoam@gmail.com for defects.

Guarantee Safe Checkout

Polaris Pro R/S/XP Kit

Rev up your ride with the Polaris Pro R/S/XP Foam Kit and experience the ultimate in comfort and stability! Designed by pros for a smooth and noise-free adventure, this kit is a must-have for any thrill-seeker. So why wait? Upgrade your UTV today!

Kit includes:

Dash Kit
Door Kit
Console Kit
Cup inserts

Additional Options can be added:

Roof Kit
Bed Kit
FloorMats
- 1/4 rubber backing and are removable.

* Templates, or measurements may be required for custom doors & roof

Installation Guide: Applying EVA Foam to Your SXS

Follow these simple steps to effectively install EVA foam on your Side-by-Side (SXS) vehicle.

Ensure you have all necessary materials before starting.

Materials Needed

- EVA foam sheets
- Isopropyl alcohol
- Clean cloths or paper towels
- Scissors or a utility knife (if trimming is needed)
- A clean, dry workspace (preferably indoors with a warm temperature)

Step-by-Step Instructions:

1. Prepare the SXS Surface

- Clean Thoroughly: Begin by thoroughly cleaning the area of your SXS where the EVA foam will be applied. Remove all dirt, grease, and debris using a suitable cleaner.
- Remove Protective Sprays: Ensure that no protective sprays like ShineOn or SC1 are present on the surface. These can interfere with the adhesive properties of the EVA foam.

2. Clean with Alcohol

- Apply Isopropyl Alcohol: Dampen a clean cloth or paper towel with isopropyl alcohol.
- Wipe Down Surface: Carefully wipe the entire surface where the foam will be attached. This step ensures that the area is free from oils and residues, promoting better adhesion.
- Allow to Dry: Let the surface dry completely before proceeding.

3. Temperature Considerations

- Avoid Cold Conditions: Installing EVA foam in cold environments is not recommended as low temperatures can affect the adhesive's effectiveness.
- Warm the Foam if Necessary: If you must work in a cold area, bring the EVA foam indoors and allow it to warm up to room temperature before installation. This ensures optimal adhesion.

4. Align and Position the Foam

- Position the Foam: Take the EVA foam sheet and align it with the desired placement area on your SXS. Ensure it is correctly positioned before adhering.

5. Adhere the Foam

- Peel Back Adhesive: Starting at one corner, gently peel back a small section of the foam’s adhesive backing.
- Press the Corner: Carefully press the exposed adhesive corner onto the surface where you want the foam to be placed.
- Gradually Apply the Foam: Slowly pull the adhesive backing away from under the foam as you press the foam onto the surface. Use a smooth, side-to-side motion to apply even pressure.
- Eliminate Air Bubbles: As you adhere the foam, continuously rub it side to side to prevent and eliminate any air bubbles from forming.
- Check for Bubbles: Once the entire foam sheet is applied, inspect the surface for any remaining air bubbles.
- Press Out Bubbles: If you find any bubbles, gently press them out towards the edges of the foam to ensure a smooth, secure finish.

Tips for a Successful Installation:

- Work in a Warm Environment: Whenever possible, perform the installation in a warm, dry area to enhance adhesive performance.
- Take Your Time: Rushing can lead to misalignment or trapped air bubbles. Patience ensures a professional-looking result.
- Trim Excess Foam: Use scissors or a utility knife to trim any excess foam for a clean fit around edges and contours.